Matte - Mélange Water-Based Crystal Clear Topcoat

Matte Top Coat

16 oz

Application Instructions:

• Sand all surfaces (finished or unfinished) in the direction of the wood grain to desired smoothness. 

• Remove all dust from sanded surfaces and clean with a tack cloth.

• Do not shake or thin.

• Do not apply in direct sunlight or in temperatures below 55°F (10°C) or above 90°F (32°C).

• Stir thoroughly prior to and during use.

• Using a high-quality nylon/polyester bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess.

• Apply a thin, even coat following the direction of the grain making sure to maintain a wet edge.

• For maximum durability, 3 coats are required.

• Do not puddle, over-brush or overlap finishes.

• Sand lightly between coats with fine sandpaper.

• Remove all dust prior to applying additional coats.

• Dries to touch in 1 hour.

• Sand or Recoat: 1 hour.

• After the final coat, allow 12 - 24 hours before light use.

• Fully cured: 3 days after the final coat.